Radiator Pipe Guide and Seals


The Face-Fix Radiator Pipe Guide and Seal.
Providing an alternative solution to heat loss to pipe entry points behind radiators.

  • Description & Key Features

    Product Description

    The Face-Fix Radiator Pipe Guide and Seal (GRS-FF) has been designed to cope with a wide range of tricky situations.
    As with all Manthorpe radiator seal products, the GRS-FF provides an effective barrier for the loss of warm air to pipe entry points behind radiators.

    The face-fix nature of the product enables the user to fit both block and studded wall details without any additional preparation work.

    The product will work with pipe work coming from below, above or from the side of the radiator.
    Fitting instructions are included.

    Key Features

    • Three secure fixing points
    • Rubber grommets hold pipe and prevent air leakage
    • Flush fit design
    • Works in all directions
  • Technical

    Fitting Requirements

    Run the pipes to the point where the radiator is to be located, leave a loop of excess pipework.

    Fit the plasterbaord, pulling the loop through a 90mm dia. hole where the seal is to be placed.

    Split the pipe and feed each leg through the grommets. Securely screw the seal to the plasterboard.



    Regulations & Standards

    Building Regulations Part L Air Leakage.

  • Specifications

    Size Information

    For use with 10mm dia. plastic pipe

    Weight 36g per unit
    1.02 kg per box

    140mm x 125mm
    Depth 21mm


    Thermoplastic Elastomer



    Quantity Information

    20 per box