Pipe & Cable Ducting

GW510-GW511

Ducting to provide easy access for service pipes and cables. Available in a variety of sizes to accommodate varying amounts of cables and pipes.

• Description & Key Features

  Product Description

  In the past builders would set their pipes into concrete floors – and a burst pipe could lead to hours of laborious work.
  Nowadays, Manthorpe’s underfloor ducting system means that for routine repair and maintenance you need little more than a screwdriver and a spare half hour.

  The pipe and cable duct comes in a variety of sizes to accommodate varying amounts of cables and pipes.

  Made from hard wearing plastic, it can be set directly into a concrete screed, and covered with a solid plywood board (GW511).

  Key Features

  • Provides easy access for service pipes and cables
  • The components are easy to handle, cut and fix
  • Joints and corners formed by simple mitring
  • The ducting is available in various sizes to accommodate multiple pipe sizes
• Technical

  Fitting Requirements

  Lay the duct on the levelled sub-floor, movement of the duct during screeding can be prevented by pinning the duct lightly to the sub-floor using masonry nails. The cover boards should then be laid in position to keep the duct straight during screeding, wet haunch either side of the duct along its length. If an expansion joint is to be used in the dry screed it should be set a minimum of 50mm away from the pipe and cable ducting.

  Certifications

  N/A

  Regulations & Standards

  Water supply bye laws 58
  Water supply bye laws 99

• Specifications

  Size Information

  GW510:
  Width: 125mm
  Depth 50mm
  Length: 3m

  GW511:
  Width: 123mm
  Depth: 12mm
  Length: 2.44m

  Material

  GW510: UPVC
  GW511: Weather/Boil Proof Plywood

  Colour

  GW510: White
  GW511: Natural

  Quantity Information

  GW510: packed in 10's in poly sleeve
  GW511: packed in 10's